Easily mount and remove the Rev Tent from a Yakima or Rhino roof rack.
These 6 C6 Eye Nuts secure the Rev Tent in the open position at 4 corners and 2 center tabs to the t-slots in the rack slats.
Just turn the 6 stainless steel nuts to attach or release the Rev Tent.
To close, quickly remove only 2 Eye Nuts , fold and zip, and the Rev Tent is ready for transport.
Includes a classy C6 Outdoor dry bag for storing your hardware, or re-use for carrying other camp smalls.
6 M8 *20 Stainless Steel (304) custom hammerhead bolts
6 Plastic Washers
6 M8 Stainless Steel (316) Eye Nuts
1 gray C6 Outdoor Dry bag
Q: What Yakima Roof Racks does the Rev Tent fit?
A: For sleeping in the Rev Tent (open position), the Rev Tent is compatible with the Yakima LockNLoad platform racks size E, N, and H. Note: The Rev Tent is not compatible with the Perimeter Rail kit on Size E. And as a general consideration on all sizes, the raised rail kit may block your entrances to the tent.
Q: I have a Rhino Rack. Will the Rev Tent fit on top for sleeping?
A: The Rev Tent will fit in the open position on the Rhino Pioneer rack models: 42116B, 42107B/52107, 42104B/52104), 42105B/42115BF NOTE: using a rail kit may interfere with mounting and / or partially block the entrances of the tent.
Q: What is the difference between the Sleep and Transport mount kit and just the Transport Mount Kit?
A: 2 Eyes nuts and bolts. If you use the Rev Tent to sleep on a Yakima or Rhino rack, you will need 6 mounts. Just to transport only 4. So you save a few bucks if you only use the rack to move the Rev Tent from A to B.
Q: I only want to sleep on the vehicle sometimes. How easy is it to move the Rev Tent to ground?
A: Very. If the tent is already open and set up, just unscrew the 6 Eye Nuts, should take under a minute, and lift the tent off and place it on the ground. If the tent is closed, just remove the 4 Eye Nuts. No tools are needed. The original Rev Tent weighs only 25 lbs, so it can be moved by one person. If it’s windy or you think it’s going to rain, you will want to stake the tent in and attach the guy lines to keep the tent taught for proper water run off…
• Do not over tighten. Repeated over tightening may damage the tent grommet.
• Check mounting points frequently as vibrations may cause Eye Nuts to loosen.
• Store Eye Nuts on your roof rack when not in use or in the supplied C6 dry bag.
Before assembling your product, download and read these instructions! While you may be able to wing it, there are some important steps you have to get right for warranty coverage and FOR YOUR SAFETY!
These .pdf guides are designed to be read and referenced from a phone or tablet offline while assembling product.
HANDY HINT 1: Make sure you download the file, as you may not have internet where ever you chose to assemble your product.
HANDY HINT 2: If using Acrobat Reader, read the guide in "single page mode".
WARNING: Failure to follow these instructions could result in damage to the product, your vehicle, or yourself and others. Please contact us if you are confused or concerned about any of the steps or use of this product.
For additional support, visit our HELP DESK.
We're currently shipping from our 2 warehouses in the USA.
We will be bringing international stores online soon. (Australia, you're next!) If you live outside the USA and can't wait to get your Rev Tent - Contact us. We ship internationally. We won't leave you hanging.