REV PICK-UP TRUCK TENT by C6 Outdoor

For ground and pick-up bed camping, the Rev Tent is ready to go out of the box.

If you want to carry your Rev Tent on the roof of your vehicle to your camping destination, you may need Rev Straps, Rev Door Hooks, or Front Runner Rack Transport Kit, or Yakima / Rhino Rack Transport Kit. 

Take your Rev Tent to 11 with the Gear & Gadget Loft, Fitted Sheets, Pillow, Blankets, and Lights.

If you'd like to upgrade your Rev Tent later for sleeping on a vehicle roof, read on:  

For securing the Rev Tent to your Front Runner, Yakima or Rhino Roof Rack 48" x 84" / 1220mm x 2134mm or larger for sleeping and transport, you’ll want either the Front Runner Transport & Sleep Mount Kit, or the Yakima / Rhino Transport & Sleep Mount Kit. 

For Vehicle Roof Top Roof Rack camping, you might need the Rev Ladder and Rev Ladder Carrying Case.

For camping on a vehicle without the proper size or style roof rack, there’s the Rev Platform.

Q:  HOW DO I GET IN MY TENT?
A:  For ground campers, there are 4 doors that double as windows. No more climbing over your sleep partner to get in or out of the tent!  And we’ve made sure the side tent openings are super tall so you don’t have to commando crawl in to the tent.   

If you’re set up on a pick-up bed, just climb onto your tailgate and enter the rear door.   

Q:  I WANT TO CAMP ON THE GROUND AND IN MY PICK-UP NOW, BUT MAY WANT TO CAMP ON MY VEHICLE ROOF LATER.  CAN I UPGRADE? 
A:  The Rev Tent can be set up on the ground or in the back of a pick-Up truck* right out of the box.  The Rev Tent comes with Guylines and Tent Stakes. When you’re ready to vehicle top camp, if you have the appropriate roof rack*,  all you’ll need is a mounting kit  (for Front Runner, Yakima or Rhino Racks 48” x 84” / 1220 mm  x  2134 mm or larger).  If you have load  bars or a smaller roof rack, you’ll need to purchase the Rev Tent platform.   

Q:  HOW DO I STORE MY REV TENT? 
A:  We recommend hanging it on your garage wall. If you don’t have a garage, you can store it under your bed, or in a walk in closet. You can even break the mattress down and store the tent in the original boxes if necessary.   

Q:  HOW DO I GET MY REV TENT TO THE CAMPSITE? 
A:  The closed Rev Tent is 47.25” L  x 42.25” W  x  8.5” T  /  120 cm  x  107 cm  x 22 cm.   It only weighs 25 lbs.  You can throw it in the bed of your pick up, or the trunk of a SUV. The folded Rev Tent even fits in the back of a Tesla.  

Most will carry the Rev Tent to the adventure destination on a vehicle roof. The outer case has plenty of tabs with grommets for multiple strapping options. We recommend using the Rev Straps for attachment to load / cross bars or any roof rack. You can even strap the tent directly to your vehicle roof using the Rev Straps along with the Rev Door Hooks.  

If you have a Front Runner, Rhino or Yakima Roof Rack you can secure your tent to the rack with the appropriate mount kit.  (Front Runner rack Transport Kit,  Yakima / Rhino Rack Transport kit)

Q: WHAT ROOF RACKS CAN I USE TO SET UP MY REV TENT FOR SLEEPING?
A:  While you can transport your Rev Tent on smaller roof racks, to open the Rev Tent and secure it for sleeping, you will need a flat platform style roof rack 48” x 84” / 1220mm x 2134mm or larger. The Rev Tent has been designed to attach at specific points to these following Front Runner, Rhino and Yakima Racks:  

FRONT RUNNER Slimline II :  any roof rack at least 11 slats long (85” / 2166mm or longer)  This includes Slimline II Racks for the Jeep JKU, Jeep JL, Land Rover LR3/LR4, old and new Defender 110, G-Wagen, Toyota Land Cruiser 200, Toyota 4Runner, all Sprinter Vans and much more. (Note: the Rev Tent is not compatible with Expedition Rail Kit Sides on the narrowest 1255mm rack)  

YAKIMA  Lock-N-Load Platform:  size E  (84” x 49”), size N (84” x 54”),  size H (84” x 62”)   (Note: The Rev Tent will not work with the Perimeter Rail Kit.) 

RHINO Pioneer Platform:  42115B  (107”x 58 “ / 2728 x 1465 mm),   42107B/52107 (84” x 49”/  2128mm x 1236mm),     42104B/52104 (84”x56” / 2128mm x1426mm),  42105B/42115BF/42119BF (107”x 58” / 2528mm x 1586mm)    (Note: The Rev Tent does not play nice with the Front and Side Rail Kits. We recommend a completely flat deck) 

Because the Rev Tent case features a variety of tabs with mounting points, the Rev Tent can also work with other brand appropriately sized platform style roof racks.  For use with Prinsu Racks you'd need to add additional slats to create proper support for tent.  You may need to get creative and take a few trips to the hardware store for the appropriate nuts and bolts to secure the tent to the platform.  For more in depth information on using The Rev Tent  on other brand flat deck roof racks visit our HELP DESK. 

Q:  HOW LONG DOES IT TAKE TO SET A REV TENT UP?
A:  GROUND and TRUCK BED set up time:  3 minutes.   1. Unzip and flip open.  2.  assemble 4 poles,  3.  pop in fly sheet eyebrows.   4. Pound in optional tent stakes and guylines or set tent in truck bed.

Before assembling your product, download and read these instructions!  While you may be able to wing it, there are some important steps you have to get right for warranty coverage and FOR YOUR SAFETY!     

These .pdf guides are designed to be read and referenced from a phone or tablet offline while assembling product.

DOWNLOAD INSTRUCTIONS

HANDY HINT 1: Make sure you download the file, as you may not have internet where ever you chose to assemble your product.   

HANDY HINT 2: If using Acrobat Reader, read the guide in "single page mode".  

WARNING: Failure to follow these instructions could result in damage to the product, your vehicle, or yourself and others.  Please contact us if you are confused or concerned about any of the steps or use of this product. 

EXTENDED CARE:

Do not use soap to clean the tent body!  Soap can damage the protective coatings.  Wipe down the case and tent with water and a soft cloth. 

Every few seasons, consider applying seam tape sealant to maintain the water proof properties of the seams. 

To extend the usable life of your tent, we recommend removing tent from the sun and elements when not in use.   

When your Rev Tent gets wet, you must air dry it completely before zipping it up. We also recommend storing the tent with a gap in the zipper.  Leave an opening for a little breathing room! 

For additional support, visit our HELP DESK.   

The Rev Pick-Up Bed Tent ships FREE via Ground in 2 boxes.  

Order by noon Pacific Standard Time and you'll have your tent in 1-2 days if you live in the lower 48 United States. (Alaska, Hawaii, and international delivery will take a bit longer) 

For more info on C6 Outdoor Shipping Policies READ THIS.